Construction
Rotors Options
Lobeline Offers a Variety of Rotor Design and Construction Suitable for the Particular Application
Straight Design.
Splined Bore.
Lobeline Rotors are of the Straight Design (the Lobe Centerline is Parallel to the Shaft Centerline) with Splined Bore
Advantages of Lobeline Rotor Design
Ideal for Shear Sensitive Fluids
The Straight Lobe Design Provides Minimum Shearing as Compared to the Convoluted Rotor Design.
Straight Liquid Path
The Straight Lobe Design Provides Straight Liquid Path from Suction to Discharge as Compared to The Convoluted Rotor Design that Imposes Tortuous Path of the Liquid from Suction to Discharge.
Solids Handling Capability
The Straight Lobe Design Provides True Non-Compressible Solids Handling Capability as Compared to the Convoluted Rotor Design that Cannot Handle Non-Compressible Solids.
High Solids Percentage
The Straight Lobe Design Out-Performs the Convoluted Rotor Design in Applications with High Percent Solids
Longer Wear Life
The Performance of the Straight Lobe Design is Less Sensitive to Wear as Compared to the Convoluted Rotor Design that Suffers from a Sudden and Significant Drop in Capacity even at Minor Rotor Wear.
Ease of Maintenance
The Straight Lobe Design Allows the Removal and Installation of One Rotor at a Time by One Maintenance Technician as Compared with the Convoluted Rotor Design that Requires the Two Rotors to be Removed or Installed Simultaneously which in Many Cases Require Two Maintenance Personnel to Perform the Rotors Change Replacement.
Splined Rotor Design
The Splined Rotor Design Facilitates the Rotor Replacement without having to Retime the Pump.
Torque Locking Assembly
The Splined Rotor Design with Torque Locking Assembly Provide Positive Location on the Shaft, and No Shaft Wear as Compared to the Keyed Shaft Design where the Shaft Replacements are required due to Worn Keyways.
Note
The Claim that Convoluted Rotors Provide Pulsation Free Design is Valid only for High Speed Rotating Equipment such as Compressors Operating at Speeds above 2000 rpm, and Does Not apply to Lobe Pumps Operating at speeds below 600 rpm.
Rotor Coating & Rotor Design Options
Rotor Coating
- Nitrile 68-70 Dr.
- HNBR
- VITON
- All Metal (for A and AR)
Rotor Design
- Straight Three Lobe
- Straight Bi-Lobe
- Circumferential Bi Lobe
Match the Right Rotor to Your Application
Tell our engineers about your fluid, solids content, and service conditions — we’ll help you select the rotor design, coating, and sealing configuration that fits.